Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzinc 42 Epoxy zinc-dust primer

Home | All models | Industrial coatings | Interzinc 42

Interzinc 42 Epoxy zinc-dust primer is supplied under the International Paint brand for primer use. It belongs to the Industrial coatings range. It provides zinc-rich priming. Published figures are: spreading rate 7.33 m²/L, DFT 50-75 µm (2-3 mil), density 1.94 kg/L (16.2 lb/US gal), solids 55%. At 25 °C it is 45 min touch dry and 150 min hard dry.

Industrial coatingsPrimerZinc-rich primerEpoxy

Basic data

Model
Interzinc 42 (Epoxy zinc-dust primer)
Product type
Epoxy zinc-dust primer
Category
Industrial coatings
Volume solids
55%
Theoretical spreading rate
7.33 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
1.94 kg/L (16.2 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 45 min / Hard dry 150 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 42 (Epoxy zinc-dust primer) data sheet; other conditions are not listed.
Other parameters
For Interzinc 42, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.136 L/m² for Interzinc 42, excluding application losses. That is about 13.6 L per 100 m². At a wet film of 91–136 µm, coverage is 3.78 m² per kg. These are theoretical values.

System and application

Interzinc 42 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.

Technical data for Interzinc 42 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 42 Epoxy zinc-dust primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interzinc 42 Epoxy zinc-dust

  • System selection for Interzinc 42 Epoxy zinc-dust: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzinc 42 Epoxy zinc-dust: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzinc 42 Epoxy zinc-dust: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.