Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzinc 52E Epoxy zinc-rich primer

Home | All models | Industrial coatings | Interzinc 52E

Interzinc 52E Epoxy zinc-rich primer is supplied under the International Paint brand for primer use. It belongs to the Industrial coatings range. It provides zinc-rich priming. Published figures are: density 2.23 kg/L (18.6 lb/US gal), solids 65%, spreading rate 13 m²/L, DFT 50-100 µm (2-4 mil). At 25 °C it is 15 min touch dry and 90 min hard dry.

Industrial coatingsPrimerZinc-rich primerEpoxy

Basic data

Model
Interzinc 52E (Epoxy zinc-rich primer)
Product type
Epoxy zinc-rich primer
Category
Industrial coatings
Volume solids
65%
Theoretical spreading rate
13 m²/L
Recommended dry film thickness
50-100 µm (2-4 mil)
Density (specific gravity)
2.23 kg/L (18.6 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 15 min / Hard dry 90 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 52E (Epoxy zinc-rich primer) data sheet; other conditions are not listed.
Other parameters
For Interzinc 52E, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.077 L/m² for Interzinc 52E, excluding application losses. That is about 7.7 L per 100 m². At a wet film of 77–154 µm, coverage is 5.83 m² per kg. These are theoretical values.

System and application

Interzinc 52E is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Interzinc 52E are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 52E Epoxy zinc-rich primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interzinc 52E Epoxy zinc-rich

  • System selection for Interzinc 52E Epoxy zinc-rich: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzinc 52E Epoxy zinc-rich: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzinc 52E Epoxy zinc-rich: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.