Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzone 505 Glass-flake epoxy coating

Home | All models | Industrial coatings | Interzone 505

Interzone 505 Glass-flake epoxy coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. It provides glass-flake barrier protection. Published figures are: spreading rate 2.25 m²/L, DFT 300-500 µm (12-20 mil), density 1.29 kg/L (10.8 lb/US gal), solids 90%. At 25 °C it is 3 h touch dry and 6 h hard dry.

Industrial coatingsGlass flakeEpoxy

Basic data

Model
Interzone 505 (Glass-flake epoxy coating)
Product type
Glass-flake epoxy coating
Category
Industrial coatings
Volume solids
90%
Theoretical spreading rate
2.25 m²/L
Recommended dry film thickness
300-500 µm (12-20 mil)
Density (specific gravity)
1.29 kg/L (10.8 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzone 505 (Glass-flake epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Interzone 505, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.444 L/m² for Interzone 505, excluding application losses. That is about 44.4 L per 100 m². At a wet film of 333–556 µm, coverage is 1.74 m² per kg. These are theoretical values.

System and application

The substrate condition for Interzone 505 has to be checked before application. Its mixing ratio and pot life follow that data sheet.

Technical data for Interzone 505 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzone 505 Glass-flake epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Interzone 505

  • System selection for Interzone 505: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzone 505: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzone 505: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.