Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzone 954 Modified epoxy coating

Home | All models | Industrial coatings | Interzone 954

Interzone 954 Modified epoxy coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 85% ± 3% (depending on colour), density 1.62 kg/L (13.5 lb/US gal), DFT 250-500 µm (10-20 mil), spreading rate 1.70 m²/L. At 25 °C it is 3.5 h touch dry and 5.5 h hard dry.

Basic data

Model
Interzone 954 (Modified epoxy coating)
Product type
Modified epoxy coating
Category
Industrial coatings
Volume solids
85% ± 3% (depending on colour)
Theoretical spreading rate
1.70 m²/L
Recommended dry film thickness
250-500 µm (10-20 mil)
Density (specific gravity)
1.62 kg/L (13.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3.5 h / Hard dry 5.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzone 954 (Modified epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Interzone 954, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.588 L/m² for Interzone 954, excluding application losses. That is about 58.8 L per 100 m². At a wet film of 294–588 µm, coverage is 1.05 m² per kg. All figures are calculated.

System and application

The substrate condition for Interzone 954 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Interzone 954 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzone 954 Modified epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Interzone 954 Modified epoxy

  • System selection for Interzone 954 Modified epoxy: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzone 954 Modified epoxy: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzone 954 Modified epoxy: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.