Industrial coatings
RELEST Wind HS Topcoat - I306-xxxx High-solids topcoat
Home | All models | Industrial coatings | RELEST Wind HS Topcoat - I306-xxxx
RELEST Wind HS Topcoat - I306-xxxx High-solids topcoat is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: density 1.3 kg/L (10.8 lb/US gal), spreading rate 10 m²/L, solids 55% ± 2%(depending on colour). At 23 °C it is 2 h touch dry and 5 h hard dry.
Basic data
- Model
- RELEST Wind HS Topcoat - I306-xxxx (High-solids topcoat)
- Product type
- High-solids topcoat
- Category
- Industrial coatings
- Volume solids
- 55% ± 2%(depending on colour)
- Theoretical spreading rate
- 10 m²/L
- Density (specific gravity)
- 1.3 kg/L (10.8 lb/US gal)
- Drying (23°C substrate temperature)
- Touch dry 2 h / Hard dry 5 h
- Drying conditions
- Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind HS Topcoat - I306-xxxx (High-solids topcoat) data sheet; other conditions are not listed.
- Other parameters
- For RELEST Wind HS Topcoat - I306-xxxx, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.100 L/m² for RELEST Wind HS Topcoat - I306-xxxx, excluding application losses. That is about 10.0 L per 100 m². Coverage is 7.69 m² per kg. All figures are calculated.
System and application
RELEST Wind HS Topcoat - I306-xxxx as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for RELEST Wind HS Topcoat - I306-xxxx can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind HS Topcoat - I306-xxxx High-solids topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on RELEST Wind HS Topcoat -
- System selection for RELEST Wind HS Topcoat -: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for RELEST Wind HS Topcoat -: take-off from area and design dry film thickness, quoted against quantity.
- Documents for RELEST Wind HS Topcoat -: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

