Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

RELEST Wind Leading Edge Cartridge Leading-edge erosion protection

Home | All models | Industrial coatings | RELEST Wind Leading Edge Cartridge

RELEST Wind Leading Edge Cartridge Leading-edge erosion protection is a polyurethane coating, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: spreading rate 4.46 m²/kg · solids >99% · density 1.12 g/cm³ (after mixing). At 23 °C it is 150 min touch dry and 19 h hard dry.

Basic data

Model
RELEST Wind Leading Edge Cartridge
Product type
Leading-edge erosion protection
Category
Industrial coatings
Volume solids
>99%
Theoretical spreading rate
4.46 m²/kg
Density (specific gravity)
1.12 g/cm³ (after mixing)
Drying (23°C substrate temperature)
Touch dry 150 min / Hard dry 19 h
Drying conditions
Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind Leading Edge Cartridge data sheet; other conditions are not listed.
Other parameters
For RELEST Wind Leading Edge Cartridge, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.224 L/m² for RELEST Wind Leading Edge Cartridge, excluding application losses. That is about 22.4 L per 100 m². Coverage is 3.98 m² per kg. The values above are calculated.

System and application

The substrate condition for RELEST Wind Leading Edge Cartridge has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for RELEST Wind Leading Edge Cartridge are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind Leading Edge Cartridge Leading-edge erosion protection”; parameters not listed here are governed by that data sheet.

Enquiries on RELEST Wind Leading Edge

  • System selection for RELEST Wind Leading Edge: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for RELEST Wind Leading Edge: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for RELEST Wind Leading Edge: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.