Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

RELEST Wind LEP ETU Cartridge - I374-8735

Home | All models | Industrial coatings | RELEST Wind LEP ETU Cartridge - I374-8735

RELEST Wind LEP ETU Cartridge - I374-8735 is a polyurethane coating, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: density 1.25 g/cm3 (after mixing), spreading rate 2 m²/kg, solids >99%. At 23 °C it is 4 h touch dry and 1 days hard dry.

Basic data

Model
RELEST Wind LEP ETU Cartridge - I374-8735
Product type
As stated in the technical data sheet
Category
Industrial coatings
Volume solids
>99%
Theoretical spreading rate
2 m²/kg
Density (specific gravity)
1.25 g/cm3 (after mixing)
Drying (23°C substrate temperature)
Touch dry 4 h / Hard dry 1 days
Drying conditions
Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind LEP ETU Cartridge - I374-8735 data sheet; other conditions are not listed.
Other parameters
For RELEST Wind LEP ETU Cartridge - I374-8735, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.500 L/m² for RELEST Wind LEP ETU Cartridge - I374-8735, excluding application losses. That is about 50.0 L per 100 m². Coverage is 1.60 m² per kg. All figures are calculated.

System and application

The substrate condition for RELEST Wind LEP ETU Cartridge - I374-8735 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for RELEST Wind LEP ETU Cartridge - I374-8735 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind LEP ETU Cartridge - I374-8735 ”; parameters not listed here are governed by that data sheet.

Enquiries on RELEST Wind LEP ETU Cartridge

  • System selection for RELEST Wind LEP ETU Cartridge: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for RELEST Wind LEP ETU Cartridge: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for RELEST Wind LEP ETU Cartridge: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.