Industrial coatings
RELEST Wind Putty Porefiller Cartridge - I372-6015 Micro-porosity filler
Home | All models | Industrial coatings | RELEST Wind Putty Porefiller Cartridge - I372-6015
RELEST Wind Putty Porefiller Cartridge - I372-6015 Micro-porosity filler is a polyurethane coating for auxiliary use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids >99%, density 1.33 g/cm³. At 23 °C it is 20 min touch dry and 140 min hard dry.
Basic data
- Model
- RELEST Wind Putty Porefiller Cartridge - I372-6015
- Product type
- Micro-porosity filler
- Category
- Industrial coatings
- Volume solids
- >99%
- Density (specific gravity)
- 1.33 g/cm³
- Drying (23°C substrate temperature)
- Touch dry 20 min / Hard dry 140 min
- Drying conditions
- Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind Putty Porefiller Cartridge - I372-6015 data sheet; other conditions are not listed.
- Other parameters
- For RELEST Wind Putty Porefiller Cartridge - I372-6015, thinning and pack sizes are as stated in the technical data.
Consumption calculation
No spreading rate is listed for RELEST Wind Putty Porefiller Cartridge - I372-6015; consumption follows the TDS.
System and application
The substrate condition for RELEST Wind Putty Porefiller Cartridge - I372-6015 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for RELEST Wind Putty Porefiller Cartridge - I372-6015 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind Putty Porefiller Cartridge - I372-6015 Micro-porosity filler”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on RELEST Wind Putty Porefiller
- System selection for RELEST Wind Putty Porefiller: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for RELEST Wind Putty Porefiller: take-off from area and design dry film thickness, quoted against quantity.
- Documents for RELEST Wind Putty Porefiller: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

