Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

RELEST Wind Putty Porefiller - I372-5615 Micro-porosity filler

Home | All models | Industrial coatings | RELEST Wind Putty Porefiller - I372-5615

RELEST Wind Putty Porefiller - I372-5615 Micro-porosity filler is a polyurethane coating for auxiliary use, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 1.33 g/cm³ (after mixing), solids 99.5%. Drying at 23 °C: 20 min touch dry, 140 min hard dry.

Industrial coatingsAuxiliaryPolyurethane

Basic data

Model
RELEST Wind Putty Porefiller - I372-5615
Product type
Micro-porosity filler
Category
Industrial coatings
Volume solids
99.5%
Density (specific gravity)
1.33 g/cm³ (after mixing)
Drying (23°C substrate temperature)
Touch dry 20 min / Hard dry 140 min
Drying conditions
Values are taken from the 23 °C substrate-temperature row of the drying table in the RELEST Wind Putty Porefiller - I372-5615 data sheet; other conditions are not listed.
Other parameters
For RELEST Wind Putty Porefiller - I372-5615, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

The TDS gives no spreading rate for RELEST Wind Putty Porefiller - I372-5615; consumption is taken from it.

System and application

For RELEST Wind Putty Porefiller - I372-5615, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.

TDS and SDS for RELEST Wind Putty Porefiller - I372-5615 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “RELEST Wind Putty Porefiller - I372-5615 Micro-porosity filler”; parameters not listed here are governed by that data sheet.

Enquiries on RELEST Wind Putty Porefiller

  • System selection for RELEST Wind Putty Porefiller: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for RELEST Wind Putty Porefiller: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for RELEST Wind Putty Porefiller: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.