Marine coatings
Interbond 201 - Temperate Epoxy primer
Home | All models | Marine coatings | Interbond 201 - Temperate
Interbond 201 - Temperate Epoxy primer is supplied under the International Paint brand for primer use. It sits in the Marine coatings range. Technical data list: DFT 150 µm, spreading rate 4.93 m²/L, solids 74% ± 2%. At 25 °C it is 4 h touch dry and 9 h hard dry.
Basic data
- Model
- Interbond 201 - Temperate (Epoxy primer)
- Product type
- Epoxy primer
- Category
- Marine coatings
- Volume solids
- 74% ± 2%
- Theoretical spreading rate
- 4.93 m²/L
- Recommended dry film thickness
- 150 µm
- Drying (25°C substrate temperature)
- Touch dry 4 h / Hard dry 9 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interbond 201 - Temperate (Epoxy primer) data sheet; other conditions are not listed.
- Other parameters
- For Interbond 201 - Temperate, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.203 L/m² for Interbond 201 - Temperate, excluding application losses. That is about 20.3 L per 100 m². At a wet film of 203 µm. All figures are calculated.
System and application
Interbond 201 - Temperate is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Interbond 201 - Temperate can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interbond 201 - Temperate Epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interbond 201 - Temperate
- System selection for Interbond 201 - Temperate: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interbond 201 - Temperate: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interbond 201 - Temperate: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

