Intergard 5555 Epoxy primer is supplied under the International Paint brand for primer use. It is catalogued under Marine coatings. The data sheet gives: spreading rate 6.2 m²/L, solids 62% ± 2%, DFT 100 µm. At 25 °C it is 4 h touch dry and 12 h hard dry.
Basic data
- Model
- Intergard 5555 (Epoxy primer)
- Product type
- Epoxy primer
- Category
- Marine coatings
- Volume solids
- 62% ± 2%
- Theoretical spreading rate
- 6.2 m²/L
- Recommended dry film thickness
- 100 µm
- Drying (25°C substrate temperature)
- Touch dry 4 h / Hard dry 12 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 5555 (Epoxy primer) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 5555, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.161 L/m² for Intergard 5555, excluding application losses. That is about 16.1 L per 100 m². At a wet film of 161 µm. The values above are calculated.
System and application
Intergard 5555 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Technical data for Intergard 5555 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 5555 Epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 5555 Epoxy primer
- System selection for Intergard 5555 Epoxy primer: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 5555 Epoxy primer: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 5555 Epoxy primer: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

