Intergard 5263 Epoxy tie coat is supplied under the International Paint brand. It belongs to the Marine coatings range. Published figures are: spreading rate 5.4 m²/L, DFT 100 µm, solids 54% ± 2%. At 25 °C it is 6 h touch dry and 16 h hard dry.
Basic data
- Model
- Intergard 5263 (Epoxy tie coat)
- Product type
- Epoxy tie coat
- Category
- Marine coatings
- Volume solids
- 54% ± 2%
- Theoretical spreading rate
- 5.4 m²/L
- Recommended dry film thickness
- 100 µm
- Drying (25°C substrate temperature)
- Touch dry 6 h / Hard dry 16 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 5263 (Epoxy tie coat) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 5263, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.185 L/m² for Intergard 5263, excluding application losses. That is about 18.5 L per 100 m². At a wet film of 185 µm. These are theoretical values.
System and application
The substrate condition for Intergard 5263 has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Technical data for Intergard 5263 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 5263 Epoxy tie coat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 5263 Epoxy tie coat
- System selection for Intergard 5263 Epoxy tie coat: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 5263 Epoxy tie coat: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 5263 Epoxy tie coat: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

