Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings / Industrial coatings

Intergard 787 High-solids pure epoxy general-purpose primer

Home | All models | Marine coatings | Intergard 787

Intergard 787 High-solids pure epoxy general-purpose primer is supplied under the International Paint brand for primer use. It belongs to the Marine coatings range. Published figures are: spreading rate 6.4 m²/L, DFT 125 µm, solids 80% ± 2%. At 25 °C it is 60 min touch dry and 3 h hard dry. Intergard 787 is used in both industrial and marine work.

Basic data

Model
Intergard 787 (High-solids pure epoxy general-purpose primer)
Product type
High-solids pure epoxy general-purpose primer
Category
Marine coatings / Industrial coatings
Volume solids
80% ± 2%
Theoretical spreading rate
6.4 m²/L
Recommended dry film thickness
125 µm
Drying (25°C substrate temperature)
Touch dry 60 min / Hard dry 3 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 787 (High-solids pure epoxy general-purpose primer) data sheet; other conditions are not listed.
Other parameters
For Intergard 787, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.156 L/m² for Intergard 787, excluding application losses. That is about 15.6 L per 100 m². At a wet film of 156 µm. These are theoretical values.

System and application

Intergard 787 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Intergard 787 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 787 High-solids pure epoxy general-purpose primer”; parameters not listed here are governed by that data sheet.

Enquiries on Intergard 787

  • System selection for Intergard 787: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intergard 787: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intergard 787: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.