Marine coatings
Intergard 821 Two-component epoxy filler
Home | All models | Marine coatings | Intergard 821
Intergard 821 Two-component epoxy filler is supplied under the International Paint brand. It is catalogued under Marine coatings. The data sheet gives: DFT 6000 µm, solids 100%, spreading rate 0.17 m²/L. Drying at 23 °C: 6 h touch dry, 24 h hard dry.
Basic data
- Model
- Intergard 821
- Product type
- Two-component epoxy filler
- Category
- Marine coatings
- Volume solids
- 100%
- Theoretical spreading rate
- 0.17 m²/L
- Recommended dry film thickness
- 6000 µm
- Drying (23°C substrate temperature)
- Touch dry 6 h / Hard dry 24 h
- Drying conditions
- Values are taken from the 23 °C substrate-temperature row of the drying table in the Intergard 821 data sheet; other conditions are not listed.
- Other parameters
- For Intergard 821, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 5.882 L/m² for Intergard 821, excluding application losses. That is about 588.2 L per 100 m². At a wet film of 6000 µm. The values above are calculated.
System and application
For Intergard 821, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Intergard 821 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 821 Two-component epoxy filler”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 821
- System selection for Intergard 821: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 821: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 821: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

