Interlac 497 Alkyd intermediate is supplied under the International Paint brand for intermediate use. It sits in the Marine coatings range. Technical data list: DFT 40 µm, spreading rate 13 m²/L, solids 52% ± 2%. At 25 °C it is 4 h touch dry and 20 h hard dry.
Basic data
- Model
- Interlac 497 (Alkyd intermediate)
- Product type
- Alkyd intermediate
- Category
- Marine coatings
- Volume solids
- 52% ± 2%
- Theoretical spreading rate
- 13 m²/L
- Recommended dry film thickness
- 40 µm
- Drying (25°C substrate temperature)
- Touch dry 4 h / Hard dry 20 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interlac 497 (Alkyd intermediate) data sheet; other conditions are not listed.
- Other parameters
- For Interlac 497, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.077 L/m² for Interlac 497, excluding application losses. That is about 7.7 L per 100 m². At a wet film of 77 µm. All figures are calculated.
System and application
Interlac 497 is applied as an intermediate. The coats either side must meet the system requirements. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Interlac 497 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interlac 497 Alkyd intermediate”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interlac 497 Alkyd
- System selection for Interlac 497 Alkyd: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interlac 497 Alkyd: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interlac 497 Alkyd: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

