Interlac 678 Alkyd clear varnish is supplied under the International Paint brand for topcoat use. It belongs to the Marine coatings range. Published figures are: solids 52% ± 2%, DFT 25 µm, spreading rate 20.8 m²/L. Drying at 25 °C: 4 h touch dry, 24 h hard dry.
Basic data
- Model
- Interlac 678 (Alkyd clear varnish)
- Product type
- Alkyd clear varnish
- Category
- Marine coatings
- Volume solids
- 52% ± 2%
- Theoretical spreading rate
- 20.8 m²/L
- Recommended dry film thickness
- 25 µm
- Drying (25°C substrate temperature)
- Touch dry 4 h / Hard dry 24 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interlac 678 (Alkyd clear varnish) data sheet; other conditions are not listed.
- Other parameters
- For Interlac 678, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.048 L/m² for Interlac 678, excluding application losses. That is about 4.8 L per 100 m². At a wet film of 48 µm. These are theoretical values.
System and application
Interlac 678 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life follow that data sheet.
Consumption for Interlac 678 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interlac 678 Alkyd clear varnish”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interlac 678 Alkyd clear
- System selection for Interlac 678 Alkyd clear: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interlac 678 Alkyd clear: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interlac 678 Alkyd clear: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

