Marine coatings
Interline 344 Inorganic zinc tank coating
Home | All models | Marine coatings | Interline 344
Interline 344 Inorganic zinc tank coating is an inorganic zinc silicate coating, supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 81% ± 2% (ASTM D2697-86), spreading rate 8.1 m²/L, DFT 100 µm. Drying at 25 °C: 15 min touch dry, 60 min hard dry.
Basic data
- Model
- Interline 344 (Inorganic zinc tank coating)
- Product type
- Inorganic zinc tank coating
- Category
- Marine coatings
- Volume solids
- 81% ± 2% (ASTM D2697-86)
- Theoretical spreading rate
- 8.1 m²/L
- Recommended dry film thickness
- 100 µm
- Drying (25°C substrate temperature)
- Touch dry 15 min / Hard dry 60 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interline 344 (Inorganic zinc tank coating) data sheet; other conditions are not listed.
- Other parameters
- For Interline 344, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.123 L/m² for Interline 344, excluding application losses. That is about 12.3 L per 100 m². At a wet film of 123 µm. All figures are calculated.
System and application
For Interline 344, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Interline 344 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interline 344 Inorganic zinc tank coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interline 344
- System selection for Interline 344: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interline 344: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interline 344: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

