Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Interplate 8010 Zinc silicate shop primer

Home | All models | Marine coatings | Interplate 8010

Interplate 8010 Zinc silicate shop primer is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 28% ± 2%, spreading rate 35 m²/L, DFT 8 µm. Drying at 25 °C: 5 min hard dry.

Basic data

Model
Interplate 8010
Product type
Zinc silicate shop primer
Category
Marine coatings
Volume solids
28% ± 2%
Theoretical spreading rate
35 m²/L
Recommended dry film thickness
8 µm
Drying (25°C substrate temperature)
Hard dry 5 min; the sheet gives hard dry only for this grade
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interplate 8010 data sheet; other conditions are not listed.
Other parameters
For Interplate 8010, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.029 L/m² for Interplate 8010, excluding application losses. That is about 2.9 L per 100 m². At a wet film of 29 µm. All figures are calculated.

System and application

For Interplate 8010, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

TDS and SDS for Interplate 8010 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interplate 8010 Zinc silicate shop primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interplate 8010

  • System selection for Interplate 8010: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interplate 8010: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interplate 8010: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.