Marine coatings
Interseal 670HS - Temperate - Global High-solids low-surface-treatment epoxy primer
Home | All models | Marine coatings | Interseal 670HS - Temperate - Global
Interseal 670HS - Temperate - Global High-solids low-surface-treatment epoxy primer is supplied under the International Paint brand. It belongs to the Marine coatings range. Published figures are: solids 82% ± 3% depending on · DFT 250 µm · spreading rate 6.56 m²/L. Drying at 25 °C: 5 h touch dry, 18 h hard dry.
Basic data
- Model
- Interseal 670HS - Temperate - Global
- Product type
- High-solids low-surface-treatment epoxy primer
- Category
- Marine coatings
- Volume solids
- 82% ± 3% depending on
- Theoretical spreading rate
- 6.56 m²/L
- Recommended dry film thickness
- 250 µm
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 18 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interseal 670HS - Temperate - Global data sheet; other conditions are not listed.
- Other parameters
- For Interseal 670HS - Temperate - Global, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.152 L/m² for Interseal 670HS - Temperate - Global, excluding application losses. That is about 15.2 L per 100 m². At a wet film of 305 µm. These are theoretical values.
System and application
For Interseal 670HS - Temperate - Global, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
TDS and SDS for Interseal 670HS - Temperate - Global are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interseal 670HS - Temperate - Global High-solids low-surface-treatment epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interseal 670HS - Temperate -
- System selection for Interseal 670HS - Temperate -: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interseal 670HS - Temperate -: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interseal 670HS - Temperate -: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

