Marine coatings
Intershield 163 Inerta 160 Epoxy abrasion-resistant coating
Home | All models | Marine coatings | Intershield 163 Inerta 160
Intershield 163 Inerta 160 Epoxy abrasion-resistant coating is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 95% ± 2%, spreading rate 1.9 m²/L, DFT 500 µm. Drying at 25 °C: 5 h touch dry, 48 h hard dry.
Basic data
- Model
- Intershield 163 Inerta 160
- Product type
- Epoxy abrasion-resistant coating
- Category
- Marine coatings
- Volume solids
- 95% ± 2%
- Theoretical spreading rate
- 1.9 m²/L
- Recommended dry film thickness
- 500 µm
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 48 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 163 Inerta 160 data sheet; other conditions are not listed.
- Other parameters
- For Intershield 163 Inerta 160, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.526 L/m² for Intershield 163 Inerta 160, excluding application losses. That is about 52.6 L per 100 m². At a wet film of 526 µm. All figures are calculated.
System and application
For Intershield 163 Inerta 160, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Intershield 163 Inerta 160 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 163 Inerta 160 Epoxy abrasion-resistant coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 163 Inerta 160
- System selection for Intershield 163 Inerta 160: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 163 Inerta 160: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 163 Inerta 160: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

