Marine coatings
Intershield 300HS High-solids abrasion-resistant aluminium-pigmented pure epoxy
Home | All models | Marine coatings | Intershield 300HS
Intershield 300HS High-solids abrasion-resistant aluminium-pigmented pure epoxy is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 78% ± 2%, spreading rate 6.24 m²/L, DFT 125 µm. Drying at 25 °C: 2 h touch dry, 4 h hard dry.
Basic data
- Model
- Intershield 300HS (High-solids abrasion-resistant aluminium-pigmented pure epoxy)
- Product type
- High-solids abrasion-resistant aluminium-pigmented pure epoxy
- Category
- Marine coatings
- Volume solids
- 78% ± 2%
- Theoretical spreading rate
- 6.24 m²/L
- Recommended dry film thickness
- 125 µm
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 300HS (High-solids abrasion-resistant aluminium-pigmented pure epoxy) data sheet; other conditions are not listed.
- Other parameters
- For Intershield 300HS, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.160 L/m² for Intershield 300HS, excluding application losses. That is about 16.0 L per 100 m². At a wet film of 160 µm. All figures are calculated.
System and application
For Intershield 300HS, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Intershield 300HS are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 300HS High-solids abrasion-resistant aluminium-pigmented pure epoxy”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 300HS
- System selection for Intershield 300HS: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 300HS: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 300HS: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

