Marine coatings
Intershield 456 High-solids epoxy primer
Home | All models | Marine coatings | Intershield 456
Intershield 456 High-solids epoxy primer is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: DFT 125 µm, spreading rate 6.72 m²/L, solids 84% ± 2% (ASTM D2697-86). At 25 °C it is 8 h hard dry.
Basic data
- Model
- Intershield 456
- Product type
- High-solids epoxy primer
- Category
- Marine coatings
- Volume solids
- 84% ± 2% (ASTM D2697-86)
- Theoretical spreading rate
- 6.72 m²/L
- Recommended dry film thickness
- 125 µm
- Drying (25°C substrate temperature)
- Hard dry 8 h; the sheet gives hard dry only for this grade
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 456 data sheet; other conditions are not listed.
- Other parameters
- For Intershield 456, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.149 L/m² for Intershield 456, excluding application losses. That is about 14.9 L per 100 m². At a wet film of 149 µm. All figures are calculated.
System and application
The substrate condition for Intershield 456 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Intershield 456 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 456 High-solids epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 456
- System selection for Intershield 456: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 456: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 456: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

