Marine coatings
Intershield 6LV Type Non-slip deck coating
Home | All models | Marine coatings | Intershield 6LV Type
Intershield 6LV Type Non-slip deck coating is supplied under the International Paint brand. It belongs to the Marine coatings range. Published figures are: spreading rate 0.49-0.73 m²/L, solids 90% ± 2%. At 23 °C it is 12 h hard dry.
Basic data
- Model
- Intershield 6LV Type
- Product type
- Non-slip deck coating
- Category
- Marine coatings
- Volume solids
- 90% ± 2%
- Theoretical spreading rate
- 0.49-0.73 m²/L
- Drying (23°C substrate temperature)
- Hard dry 12 h; the sheet gives hard dry only for this grade
- Drying conditions
- Values are taken from the 23 °C substrate-temperature row of the drying table in the Intershield 6LV Type data sheet; other conditions are not listed.
- Other parameters
- For Intershield 6LV Type, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 2.041 L/m² for Intershield 6LV Type, excluding application losses. That is about 204.1 L per 100 m². These are theoretical values.
System and application
The substrate condition for Intershield 6LV Type has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Intershield 6LV Type are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 6LV Type Non-slip deck coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 6LV Type
- System selection for Intershield 6LV Type: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 6LV Type: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 6LV Type: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

