Marine coatings
Intershield 851 Epoxy non-slip topcoat
Home | All models | Marine coatings | Intershield 851
Intershield 851 Epoxy non-slip topcoat is supplied under the International Paint brand. It is catalogued under Marine coatings. The data sheet gives: DFT 1000 µm, solids 77% ± 2%, spreading rate 0.77 m²/L. Drying at 25 °C: 5 h touch dry, 16 h hard dry.
Basic data
- Model
- Intershield 851
- Product type
- Epoxy non-slip topcoat
- Category
- Marine coatings
- Volume solids
- 77% ± 2%
- Theoretical spreading rate
- 0.77 m²/L
- Recommended dry film thickness
- 1000 µm
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 16 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 851 data sheet; other conditions are not listed.
- Other parameters
- For Intershield 851, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 1.299 L/m² for Intershield 851, excluding application losses. That is about 129.9 L per 100 m². At a wet film of 1299 µm. The values above are calculated.
System and application
For Intershield 851, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
TDS and SDS for Intershield 851 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 851 Epoxy non-slip topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 851 Epoxy
- System selection for Intershield 851 Epoxy: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 851 Epoxy: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 851 Epoxy: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

