Marine coatings
Intershield 9L Epoxy non-slip deck coating
Home | All models | Marine coatings | Intershield 9L
Intershield 9L Epoxy non-slip deck coating is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 92% · spreading rate 0.49-0.61 m²/L. At 25 °C it is 6 h hard dry.
Basic data
- Model
- Intershield 9L
- Product type
- Epoxy non-slip deck coating
- Category
- Marine coatings
- Volume solids
- 92%
- Theoretical spreading rate
- 0.49-0.61 m²/L
- Drying (25°C substrate temperature)
- Hard dry 6 h; the sheet gives hard dry only for this grade
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 9L data sheet; other conditions are not listed.
- Other parameters
- For Intershield 9L, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 2.041 L/m² for Intershield 9L, excluding application losses. That is about 204.1 L per 100 m². All figures are calculated.
System and application
The substrate condition for Intershield 9L has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Intershield 9L can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 9L Epoxy non-slip deck coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield 9L
- System selection for Intershield 9L: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield 9L: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield 9L: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

