Marine coatings / Industrial coatings
Intershield One-2-One - Aluminium Surface-tolerant general-purpose pure epoxy primer
Home | All models | Marine coatings | Intershield One-2-One - Aluminium
Intershield One-2-One - Aluminium Surface-tolerant general-purpose pure epoxy primer is supplied under the International Paint brand. It sits in the Marine coatings range. Technical data list: solids 65% ± 2% · spreading rate 8.67 m²/L · DFT 75 µm. Drying at 25 °C: 3 h touch dry, 4 h hard dry. Intershield One-2-One - Aluminium has applications in both sectors.
Basic data
- Model
- Intershield One-2-One - Aluminium
- Product type
- Surface-tolerant general-purpose pure epoxy primer
- Category
- Marine coatings / Industrial coatings
- Volume solids
- 65% ± 2%
- Theoretical spreading rate
- 8.67 m²/L
- Recommended dry film thickness
- 75 µm
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield One-2-One - Aluminium data sheet; other conditions are not listed.
- Other parameters
- For Intershield One-2-One - Aluminium, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.115 L/m² for Intershield One-2-One - Aluminium, excluding application losses. That is about 11.5 L per 100 m². At a wet film of 115 µm. All figures are calculated.
System and application
For Intershield One-2-One - Aluminium, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Intershield One-2-One - Aluminium are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield One-2-One - Aluminium Surface-tolerant general-purpose pure epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield One-2-One -
- System selection for Intershield One-2-One -: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield One-2-One -: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield One-2-One -: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

