Marine coatings
Intershield One-2-One - Red Epoxy primer
Home | All models | Marine coatings | Intershield One-2-One - Red
Intershield One-2-One - Red Epoxy primer is supplied under the International Paint brand for primer use. It belongs to the Marine coatings range. Published figures are: solids 67% ± 2% · DFT 75 µm · spreading rate 8.93 m²/L. Drying at 25 °C: 3 h touch dry, 4 h hard dry.
Basic data
- Model
- Intershield One-2-One - Red (Epoxy primer)
- Product type
- Epoxy primer
- Category
- Marine coatings
- Volume solids
- 67% ± 2%
- Theoretical spreading rate
- 8.93 m²/L
- Recommended dry film thickness
- 75 µm
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield One-2-One - Red (Epoxy primer) data sheet; other conditions are not listed.
- Other parameters
- For Intershield One-2-One - Red, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.112 L/m² for Intershield One-2-One - Red, excluding application losses. That is about 11.2 L per 100 m². At a wet film of 112 µm. These are theoretical values.
System and application
Intershield One-2-One - Red as a primer, Surface preparation comes first. Its mixing ratio and pot life follow that data sheet.
Consumption for Intershield One-2-One - Red is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield One-2-One - Red Epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intershield One-2-One - Red
- System selection for Intershield One-2-One - Red: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intershield One-2-One - Red: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intershield One-2-One - Red: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

