Marine coatings
Intersleek 1001 Elastomeric fouling-release coating
Home | All models | Marine coatings | Intersleek 1001
Intersleek 1001 Elastomeric fouling-release coating is supplied under the International Paint brand. It sits in the Marine coatings range. It provides antifouling protection. Technical data list: DFT 150 µm · spreading rate 4.8 m²/L · solids 72% ± 2%. At 25 °C it is 3 h touch dry and 5 h hard dry.
Basic data
- Model
- Intersleek 1001 (Elastomeric fouling-release coating)
- Product type
- Elastomeric fouling-release coating
- Category
- Marine coatings
- Volume solids
- 72% ± 2%
- Theoretical spreading rate
- 4.8 m²/L
- Recommended dry film thickness
- 150 µm
- Drying (25°C substrate temperature)
- Touch dry 3 h / Hard dry 5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersleek 1001 (Elastomeric fouling-release coating) data sheet; other conditions are not listed.
- Other parameters
- For Intersleek 1001, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.208 L/m² for Intersleek 1001, excluding application losses. That is about 20.8 L per 100 m². At a wet film of 208 µm. All figures are calculated.
System and application
The substrate condition for Intersleek 1001 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Intersleek 1001 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersleek 1001 Elastomeric fouling-release coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersleek 1001
- System selection for Intersleek 1001: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersleek 1001: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersleek 1001: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

