Intersleek 717 Tie coat is supplied under the International Paint brand. It belongs to the Marine coatings range. Its function is antifouling protection. Published figures are: solids 54% ± 2%, DFT 100 µm, spreading rate 5.4 m²/L. Drying at 25 °C: 40 min touch dry, 3 h hard dry.
Basic data
- Model
- Intersleek 717 (Tie coat)
- Product type
- Tie coat
- Category
- Marine coatings
- Volume solids
- 54% ± 2%
- Theoretical spreading rate
- 5.4 m²/L
- Recommended dry film thickness
- 100 µm
- Drying (25°C substrate temperature)
- Touch dry 40 min / Hard dry 3 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersleek 717 (Tie coat) data sheet; other conditions are not listed.
- Other parameters
- For Intersleek 717, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.185 L/m² for Intersleek 717, excluding application losses. That is about 18.5 L per 100 m². At a wet film of 185 µm. These are theoretical values.
System and application
For Intersleek 717, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
TDS and SDS for Intersleek 717 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersleek 717 Tie coat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersleek 717 Tie coat
- System selection for Intersleek 717 Tie coat: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersleek 717 Tie coat: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersleek 717 Tie coat: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

