Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Intersmooth 7200Si SPC Tin-free self-polishing copolymer antifouling

Home | All models | Marine coatings | Intersmooth 7200Si SPC

Intersmooth 7200Si SPC Tin-free self-polishing copolymer antifouling is supplied under the International Paint brand. It sits in the Marine coatings range. It provides antifouling protection. Technical data list: DFT 200 µm · spreading rate 8.1-3.0 m²/L · solids 61% ± 2%. At 25 °C it is 1.5 h touch dry.

Marine coatingsAntifouling

Basic data

Model
Intersmooth 7200Si SPC (Tin-free self-polishing copolymer antifouling)
Product type
Tin-free self-polishing copolymer antifouling
Category
Marine coatings
Volume solids
61% ± 2%
Theoretical spreading rate
8.1-3.0 m²/L
Recommended dry film thickness
200 µm
Drying (25°C substrate temperature)
Touch dry 1.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 7200Si SPC (Tin-free self-polishing copolymer antifouling) data sheet; other conditions are not listed.
Other parameters
For Intersmooth 7200Si SPC, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.123 L/m² for Intersmooth 7200Si SPC, excluding application losses. That is about 12.3 L per 100 m². At a wet film of 328 µm. All figures are calculated.

System and application

The substrate condition for Intersmooth 7200Si SPC has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Intersmooth 7200Si SPC can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 7200Si SPC Tin-free self-polishing copolymer antifouling”; parameters not listed here are governed by that data sheet.

Enquiries on Intersmooth 7200Si SPC

  • System selection for Intersmooth 7200Si SPC: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intersmooth 7200Si SPC: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intersmooth 7200Si SPC: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.