Marine coatings
Intersmooth 7465HS SPC Tin-free self-polishing copolymer antifouling
Home | All models | Marine coatings | Intersmooth 7465HS SPC
Intersmooth 7465HS SPC Tin-free self-polishing copolymer antifouling is supplied under the International Paint brand. It sits in the Marine coatings range. It provides antifouling protection. Technical data list: DFT 200 µm · spreading rate 2.7 m²/L · solids 54% ± 2%. At 25 °C it is 40 min touch dry.
Basic data
- Model
- Intersmooth 7465HS SPC (Tin-free self-polishing copolymer antifouling)
- Product type
- Tin-free self-polishing copolymer antifouling
- Category
- Marine coatings
- Volume solids
- 54% ± 2%
- Theoretical spreading rate
- 2.7 m²/L
- Recommended dry film thickness
- 200 µm
- Drying (25°C substrate temperature)
- Touch dry 40 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 7465HS SPC (Tin-free self-polishing copolymer antifouling) data sheet; other conditions are not listed.
- Other parameters
- For Intersmooth 7465HS SPC, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.370 L/m² for Intersmooth 7465HS SPC, excluding application losses. That is about 37.0 L per 100 m². At a wet film of 370 µm. All figures are calculated.
System and application
The substrate condition for Intersmooth 7465HS SPC has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Intersmooth 7465HS SPC can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 7465HS SPC Tin-free self-polishing copolymer antifouling”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intersmooth 7465HS SPC
- System selection for Intersmooth 7465HS SPC: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intersmooth 7465HS SPC: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intersmooth 7465HS SPC: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

