Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Marine coatings

Intersmooth 7476Si SPC – ME, SEA, N.Asia Tin-free self-polishing copolymer antifouling

Home | All models | Marine coatings | Intersmooth 7476Si SPC – ME, SEA, N.Asia

Intersmooth 7476Si SPC – ME, SEA, N.Asia Tin-free self-polishing copolymer antifouling is supplied under the International Paint brand. It sits in the Marine coatings range. It provides antifouling protection. Technical data list: DFT 170 µm · spreading rate 7.47-4.48 m²/L · solids 56% ± 2%. At 25 °C it is 30 min touch dry.

Marine coatingsAntifouling

Basic data

Model
Intersmooth 7476Si SPC – ME, SEA, N.Asia (Tin-free self-polishing copolymer antifouling)
Product type
Tin-free self-polishing copolymer antifouling
Category
Marine coatings
Volume solids
56% ± 2%
Theoretical spreading rate
7.47-4.48 m²/L
Recommended dry film thickness
170 µm
Drying (25°C substrate temperature)
Touch dry 30 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersmooth 7476Si SPC – ME, SEA, N.Asia (Tin-free self-polishing copolymer antifouling) data sheet; other conditions are not listed.
Other parameters
For Intersmooth 7476Si SPC – ME, SEA, N.Asia, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.134 L/m² for Intersmooth 7476Si SPC – ME, SEA, N.Asia, excluding application losses. That is about 13.4 L per 100 m². At a wet film of 304 µm. All figures are calculated.

System and application

The substrate condition for Intersmooth 7476Si SPC – ME, SEA, N.Asia has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Selection and consumption for Intersmooth 7476Si SPC – ME, SEA, N.Asia are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersmooth 7476Si SPC – ME, SEA, N.Asia Tin-free self-polishing copolymer antifouling”; parameters not listed here are governed by that data sheet.

Enquiries on Intersmooth 7476Si SPC – ME,

  • System selection for Intersmooth 7476Si SPC – ME,: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intersmooth 7476Si SPC – ME,: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intersmooth 7476Si SPC – ME,: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.