Marine coatings
Interswift 6600 Tin-free antifouling
Home | All models | Marine coatings | Interswift 6600
Interswift 6600 Tin-free antifouling is supplied under the International Paint brand. It is catalogued under Marine coatings. Its function is antifouling protection. The data sheet gives: DFT 150 µm, solids 58% ± 2%, spreading rate 3.9 m²/L. Drying at 25 °C: 2 h touch dry.
Basic data
- Model
- Interswift 6600 (Tin-free antifouling)
- Product type
- Tin-free antifouling
- Category
- Marine coatings
- Volume solids
- 58% ± 2%
- Theoretical spreading rate
- 3.9 m²/L
- Recommended dry film thickness
- 150 µm
- Drying (25°C substrate temperature)
- Touch dry 2 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interswift 6600 (Tin-free antifouling) data sheet; other conditions are not listed.
- Other parameters
- For Interswift 6600, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.256 L/m² for Interswift 6600, excluding application losses. That is about 25.6 L per 100 m². At a wet film of 259 µm. The values above are calculated.
System and application
For Interswift 6600, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interswift 6600 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interswift 6600 Tin-free antifouling”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interswift 6600 Tin-free
- System selection for Interswift 6600 Tin-free: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interswift 6600 Tin-free: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interswift 6600 Tin-free: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

